Jeffries Natural Leathercare
Kitting out your horse or pony with tack and clothing can easily cost as much as the animal itself with the saddle being the main investment.
Naturally most owners want to look after their equipment to ensure it is comfortable for the horse and to get the best out of it so it lasts for many years to come.
Here is some advice from leading saddlery manufacturers E Jeffries & Sons Ltd.
Looking After Leather
The correct care and maintenance of tack undoubtedly prolongs its life. Regular checks on the stitching and condition of the leather are also essential for safety.
All tack should be sponged off and wiped over after it has been used and the bit washed, then dismantled once a week and cleaned thoroughly to keep it in good order. This includes accessories such as headcollars, boots, girths and numnahs.
Saddles and bridles should be cleaned after use whilst they are still warm as the dirt is easier to remove.
Begin by rubbing over the leather with a damp towelling cloth or sponge to remove any dirt, then work saddle soap into both sides of the leather, paying special attention to any folds and bends. A glycerine based soap is considered the best for removing sweat and grease from the surface of the leather. Care should be taken that leather doesnt become too wet and soapy.
You should pay particular attention to the condition of the leather on the reins, which may become worn and thin around the bit and also inspect the billet, linings and the security of the hook stud. Ensure the girth straps and stirrup leathers are fit for purpose for safe and secure riding.
Also check all stitching and attend to any signs of wear immediately before your saddlery becomes unsafe.
Metal work should be washed in warm water and dried carefully. Metal polish can be applied to give it a shine, but avoid using it on mouthpieces, as it has an unpleasant taste.
If rubbers are used in the stirrup irons, remove them and wash and dry them before replacing.
Girths made of webbing, string or nylon should be brushed off after use and given a chance to dry and air naturally. Wash if necessary, but not in strong soap powders or detergents which may cause a reaction.
Leather girths should be inspected for any signs of wear and check the stitching around the buckle area, also check any elastic inserts for wear. Always clean regularly so as to keep your girth soft and supple. This will help avoid any sores and rubs.
Numnahs should be kept dry, clean and soft. Once they become rough they can cause a sore back and defeat their purpose. Regular brushing with a stiff brush, or combing with a plastic curry comb will keep sheepskin soft. Again, many can be washed in a machine, but sheepskin is best washed by hand and allowed to dry naturally.
At least once a week all saddlery should be dismantled completely, inspected and cleaned thoroughly following the procedure above. Make sure you know how to put it all back together !
It is also best to undo the hook studs on the end of cheekpieces and reins so you can clean the linings on the insides of the turns and keep them easily workable. Few things are more infuriating and time-wasting than stiff, stubborn hook studs !
Remove any soap out of the holes with a matchstick or cocktail stick and buckles can be cleaned with a metal polish.
Always inspect the tack for worn stitching, fraying and cracked leather.
There are currently no reviews for this product. Be the first to review by clicking below!
Review this product...